Fenwick’s cleaning products
Fenwicks FS-1 – No acids or solvents, ideal for all bikes
Unlike many competitor products manufactured from powdered raw materials, which leave a powdery residue when dry, Fenwicks FS-1 Bike Cleaner Concentrate uses a complex blend of liquid raw materials which cleans deeply and easily to leave exceptionally clean contaminant-free surfaces. Safe for you, your bike and the environment. Free from caustics, metasilicates, abrasives and silicone. Safe for use on all bike parts including carbon fibre, disc brakes, delicate anodized parts, etc. Plus it’s strong enough to be a great degreaser.
Available in 1 Litre or 5 Litre Bottles
How to use FS-1 as a degreaser
No need to wet bike beforehand.
Step 1: Apply neat to drive train or parts that need degreasing – can be used in any chain bath and allow to soak in for a couple of minutes before cleaning off.
Step 2: Agitate with brush or sponge.
Step 3: Rinse thoroughly with clean water.
How to use FS-1 as a bike cleaner
Using the fill level mark on a Fenwicks spray bottle dilute 1 part Fenwicks FS-1 Bike Cleaner Concentrate to 10 parts water.
No need to wet bike beforehand.
Step 1: Spray bike thoroughly with the diluted mixture.
Step 2: Allow to soak in for a couple of minutes before cleaning off.
Step 3: Agitate dirt with brush or sponge.
Step 4: Rinse thoroughly with clean water..
Foaming Chain Cleaner – No Acids or solvents. For all bikes
Fenwicks Foaming Chain Cleaner is a wet degreaser designed to stay in place whilst working on the effected areas. Due to its rich foam qualities the degreaser is far less messy to work with as brushing and agitating the product does not fling it everywhere unlike watery degreasers. Can be sprayed directly on to the chain, cassette, and chain rings and washed off with water to leave a clean contaminant-free drive train.
Available in 200ml or 500ml Aerosol Spray
How to use Foaming Chain Cleaner
Shake can before use.
No need to wet bike beforehand even when dirt is dried on.
Step 1: Place chain in middle gear for ease of use.
Step 2: Whilst turning the crank spray Fenwick’s Foaming Chain Cleaner directly on to chain.
Step 3: Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwicks FS-10 Bike Cleaner.
Step 4: For best results run the chain through the Fenwicks Chain Cleaning Sponge, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean.
Step 5: Rinse thoroughly with clean water.
After clean care: Relube with any Fenwick’s chain lube.
Handy hints
As a water soluble degreaser Fenwicks Foaming Chain Cleaner can be used on delicate parts.
Disc Brake Cleaner – For dry degreasing of all metal parts
Fenwicks Disc Brake Cleaner utilises a variety of solvents for an enhanced deep clean. It is formulated to improve brake performance and helps to prevent brake squeal caused by contamination and pad glazing.
As a dry degreaser Fenwicks Disc Brake Cleaner is suitable for use on chains, gear mechs, cassettes, chainsets, rims and bearings, leaving perfectly clean, dry, contaminant-free surfaces.
Available in 200ml or 500ml Aerosol Spray
How to use Disc Brake Cleaner
No need to wet bike beforehand even when dirt is dried on.
Step 1: Initially spray from a distance of 20cm to wet down the surface to be cleaned – use short blasts.
Step 2: Leave for 10 seconds.
Step 3: Agitate dirt with brush or sponge.
Step 4: After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent cloth.
There are many more products that Fenwick’s offer That can be found on our site.
I know it is my first choice.
